High-Performance Nirox Drill

The high-performance Nirox drill from Sphinx is available in diameters from 0.30 - 3.00 mm. The Nirox was developed for use at low cutting speeds and unstable environments. Its geometry has a degressive helix angle equal to 30° at the point and is designed for accurate and precise hole location up to 9xD.

A modern, TiAlSiN based coating allows for enhanced chip and coolant evacuation in difficult to machine and adhesive materials, such as titanium, Inconel, stainless steel, hardened steel, and CoCr alloys.

¿Tiene alguna pregunta? - Pregunte a nuestros expertos en herramientas!

Características
  • New hard coating with smooth surface for enhanced chip and coolant flow
  • Degressive helix angle
  • Point geometry designed for accurate and precise hole location
  • Unique margin geometry for optimum guidance
  • External coolant along the flutes
  • Modern TiAlSiN coating for use in difficult to machine and adhesive materials (Titanium, Inconel, Stainless Steel, Hardened Steel, CoCr Alloys, etc.)
Información Técnica
55 resultados
40.51609.0030

40.51609.0030

Carbide NIROX Drill, Ø0.30mm(TiAlSiN)

 0.02 lbs
Cotización
40.51609.0035

40.51609.0035

Carbide NIROX Drill, Ø0.35mm(TiAlSiN)

 0.02 lbs
Cotización
40.51609.0040

40.51609.0040

Carbide NIROX Drill, Ø0.40mm(TiAlSiN)

 0.02 lbs
Cotización
40.51609.0045

40.51609.0045

Carbide NIROX Drill, Ø0.45mm(TiAlSiN)

 0.02 lbs
Cotización
40.51609.0050

40.51609.0050

Carbide NIROX Drill, Ø0.50mm(TiAlSiN)

 0.02 lbs
Cotización
40.51609.0055

40.51609.0055

Carbide NIROX Drill, Ø0.55mm(TiAlSiN)

 8 In Stock 8 En Stock 0.02 lbs
Cotización
40.51609.0060

40.51609.0060

Carbide NIROX Drill, Ø0.60mm(TiAlSiN)

 0.02 lbs
Cotización
40.51609.0065

40.51609.0065

Carbide NIROX Drill, Ø0.65mm(TiAlSiN)

 0.02 lbs
Cotización
40.51609.0070

40.51609.0070

Carbide NIROX Drill, Ø0.70mm(TiAlSiN)

 0.02 lbs
Cotización
40.51609.0075

40.51609.0075

Carbide NIROX Drill, Ø0.75mm(TiAlSiN)

 0.02 lbs
Cotización
Pàgina 1 de 6