Consejos y Trucos de Aplicación

Reducing L:D Ratio Provides Improvements

Reducing the L:D ratio provides an improvement in speed which then provides longer tool life, better surface finish and size control of the bore.

Categorías

Lubrication Intervals for Fine Boring Heads

To ensure reliable performance, find out how often should you lubricate your fine boring head.

Categorías

Ground Chip-breakers vs. Molded Chip-breakers

Ground chip-breaker and molded chip-breaker

When it comes to boring operations, learn when to use a ground chip-breaker vs. a molded chip-breaker.

Categorías

EWE Heads Shipping with Plastic Battery Tab

The EWE digital boring heads now ship with a plastic battery tab to prevent the head from turning on during shipping.

Categorías

How to Find Minimum Insertion Depth

The is no general rule to cutting tool shank insertion as a multiplier for shank diameter. All tool holder types have different requirements.

Categorías

What is BBT and BCV?

Sometimes our customers see our tool holder catalog numbers and ask us, "What is BBT and BCV?" Great question!

Categorías

Boreado de Desbaste contra Boreado de Acabado

BIG KAISER Twin Cutter Rough Boring Head

Hay mas de una forma posible de realizar una misma tarea, al igual que hay más de una forma de terminar un barreno.

Categorías

Part Size Doesn't Matter for UNILOCK Workholding

No part or fixture is too small or too big for UNILOCK. The only limit is your imagination.

Categorías

Sujeción de trabajo

Use MEGA Chucks to Increase Your Tool Life

As cutting tool diameters get smaller, the acceptable amount of runout must decrease substantially.

Categorías

Is Boring Faster than Reaming?

When making holes it can be difficult to decide between reaming or boring. Which way is actually faster?

Categorías

Back Boring with Series 310 Boring Heads

Insert holders on most Series 310 boring heads can be mounted upside down to perform precision back boring operations.

Categorías

Download 2D and 3D Tool Data with this Online Tool

You can download 2D and 3D tool data with our Manuals, DXF and Step Search online tool. It is as easy as searching for a catalog number.

Categorías

Destacado

Interés general

Precision Micro End Mills Catalog

Did you know we have a stand alone catalog containing 14 precision micro end mill geometries?

Categorías

Tool Holders that Maintain Runout Accuracy When It Matters

Hydraulic chucks are an excellent choice for high accuracy applications due to their ability to maintain runout accuracy over an extended period of time.

Categorías

Why Does My Digital Boring Head Display Read Accu?

EWD/EWE digital boring head displaying "Accu"

This message does not mean there is an error or accuracy malfunction with the boring head.

Categorías

Demystifying Insert Nose Radius Selection

Even among experienced machinists, choosing the right insert for a boring a hole remains a difficult process that is fraught with myth and misconception. However, it is no myth that insert selection can completely save or kill performance on an application.

Categorías

How to Improve Cycle Time When Creating Wire EDM Starter Holes

Coated carbide micro deep hole drills manufactured by Sphinx Tools can reliably create wire EDM starter holes up to 5x faster than traditional wire erosion techniques.

Categorías

Digital Boring Head Backlash?

"I just received my 112 Series Digital boring head, and the backlash is terrible! How do I return this head for a standard dial type?" Not so fast! Do you have a boring bar clamped in the head yet?

Categorías

Get the Most Gripping Strength and Accuracy out of Your Tool Holders

Portaherramientas hidráulico superdelgado BIG-PLUS® BT

Overall gripping strength increases as you increase the size of your tool holders (when looking at the same type of holder).

Categorías

Correct Clamping of Mechanical Milling Chucks

When using a mechanical milling chuck that implements a needle bearing cage the correct clamping position will vary.

Categorías

Diameter Adjustments on Digital Boring Heads

Do not make diameter adjustments on BIG KAISER EWD/EWE digital boring heads unless a boring bar is clamped in the boring head.

Categorías

Coolant & High Performance Drills

When using a high-performance drill, we do not recommend turning on coolant until the drill is inside a 1-2xD deep pilot hole.

Categorías

Use Air to Maintain Your Loading System

To maintain a highly repeatable loading system, use air to clean the clamping knobs.

Categorías

Sujeción de trabajo

Cleaning is Key to Runout Control

Cleanliness is key to achieving good runout control when assembling tool holders. Small particles or oil in a tool holder can cause large runout of the cutting tool, deceasing tool life and performance.

Categorías

Accesorios

Drill Reamers Suitable for Tight Tolerance Holes Requiring Excellent Surface Finish

Did you know Sphinx offers 3 unique drill/reamer geometries capable of drilling from a solid while achieving H7-H9 hole tolerance with exceptionally good surface finish?

Categorías